Service Hours: Monday to Friday,Saturday: Guangfu Road branch only, Closed on Sundays and public holidays. For specific hours, please see details for each branch.
All marked prices are tax-inclusive and in TWD. Free shipping for purchases over 1200 (mainland Taiwan).
Language: English Centenary Materials Co., Ltd.
Login
Categories

Categories Centenary Materials Co., Ltd.
02 Batteries & Chargers & Spot Weldings Centenary Materials Co., Ltd.
03 Cables / Wires & Accessories Centenary Materials Co., Ltd.
05 Capacitors Centenary Materials Co., Ltd.
06 Computer Accessories Centenary Materials Co., Ltd.
07 Cable Assembly Centenary Materials Co., Ltd.
09 RF Cable & RF Antenna & Coaxial Connectors & Tools Centenary Materials Co., Ltd.
10 Multipole-Connectors & Tools Centenary Materials Co., Ltd.
11 Terminals, Test Leads & Spring Probes Centenary Materials Co., Ltd.
13 Circular & Rectangular Heavy-Duty Industrial Connectors Centenary Materials Co., Ltd.
18 Fuses & Circuit Protections Centenary Materials Co., Ltd.
21 Lighting, Lamps & Torches Centenary Materials Co., Ltd.
23 Optoelectronics & Indicators Centenary Materials Co., Ltd.
27 Power Supplies & UPS Centenary Materials Co., Ltd.
29 Relays & Solenoids Centenary Materials Co., Ltd.
30 Resistors & Potentiometers Centenary Materials Co., Ltd.
31 Discretes, TVS, Traics, SCRs & Diacs Centenary Materials Co., Ltd.
47 Soldering & Desoldering Centenary Materials Co., Ltd.
49 Inductors & Filters Centenary Materials Co., Ltd.
50 Switches & Control Gear Centenary Materials Co., Ltd.
52 Timers, Counters & Hour Meters Centenary Materials Co., Ltd.
54 MPU Programmers & Development Tools Centenary Materials Co., Ltd.
57 Logic Analysis, EPROM Programmers & IC Test Sockets Centenary Materials Co., Ltd.
58 Multimeters & Panel Meters Centenary Materials Co., Ltd.
59 Oscilloscopes, Signal Generators & Frequency Counter Centenary Materials Co., Ltd.
62 Lubricants & Greases Centenary Materials Co., Ltd.
66 Fasteners, Fixings & Snap Rivets Centenary Materials Co., Ltd.
68 Hand Tools & Kits Centenary Materials Co., Ltd.
76 Enclosures, Storage & Tool Cases Centenary Materials Co., Ltd.
80 New Products Centenary Materials Co., Ltd.
No matching category
8-bit MCU with 2K Bytes Flash - 32713 Product Image
8-bit MCU with 2K Bytes Flash - 32713 Product Image
8-bit MCU with 2K Bytes Flash - 32713 Product Image
8-bit MCU with 2K Bytes Flash - 32713 Product Image
8-bit MCU with 2K Bytes Flash Product Image
8-bit MCU with 2K Bytes Flash Zoom Image
8-bit MCU with 2K Bytes Flash - 32713
8-bit MCU with 2K Bytes Flash - 32713
8-bit MCU with 2K Bytes Flash - 32713
8-bit MCU with 2K Bytes Flash - 32713
Centenary Materials Co., Ltd.
ATMEL
In Stock
8-bit MCU with 2K Bytes Flash
100Y ID: 32713
Part Number: AT89C2051-24SU
Brand: ATMEL
Pkg Unit: 1 PCS
Contact us for bulk pricing
NT$ 72
Tax Incl. Tax Excl.
Note: 8-bit MCU with 2K Bytes Flash
Store Locations Store Stock Shelf Location Map
Guangfu Store 16 170-2-06-F Centenary Materials Co., Ltd.
Longshan Store 0
Download Datasheet Download Datasheet
Share Product Link
Product Features

ATMEL-AT89C2051

8-bit MCU with 2K Bytes Flash

 
 
 
Features
 
 

●Compatible with MCS®-51Products
●2K Bytes of Reprogrammable Flash Memory 
– Endurance: 10,000 Write/Erase Cycles
●2.7V to 6V Operating Range
●Fully Static Operation: 0 Hz to 24 MHz
●Two-level Program Memory Lock
●128 x 8-bit Internal RAM
●15 Programmable I/O Lines
●Two 16-bit Timer/Counters
●Six Interrupt Sources
●Programmable Serial UART Channel
●Direct LED Drive Outputs
●On-chip Analog Comparator
●Low-power Idle and Power-down Modes
●Green (Pb/Halide-free) Packaging Option


 
 
 
Description
 
 

The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microcomputer with 2K bytes of Flash programmable and erasable read-only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a power-ful microcomputer which provides a highly-flexible and cost-effective solution to many embedded control applications. 
The AT89C2051 provides the following standard features: 2K bytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator and clock circuitry. In addition, the AT89C2051 is designed with static logic for opera-tion down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The power-down mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset.

 
 
 
Pin Configuration
 
 

 
 
 
Block Diagram
 
 

 
 
 
Pin Description
 
 

 
 
 
Oscillator Characteristics
 
 

 
 
 
Special Function Registers
 
 

A map of the on-chip memory area called the Special Function Register (SFR) space is shown in the table below. Note that not all of the addresses are occupied, and unoccupied addresses may not be imple-mented on the chip. Read accesses to these addresses will in general return random data, and write accesses will have an indeterminate effect. User software should not write 1s to these unlisted locations, since they may be used in future products to invoke new features. In that case, the reset or inactive values of the new bits will always be 0.

 
 
 

 
 
 
Restrictions on Certain Instructions
 
 

 
 
 
Program Memory Lock Bits
 
 

 
 
 
Idle Mode
 
 

 In idle mode, the CPU puts itself to sleep while all the on-chip peripherals remain active. The mode is invoked by software. The content of the on-chip RAM and all the special functions regis-ters remain unchanged during this mode. The idle mode can be terminated by any enabled interrupt or by a hardware reset. 
The P1.0 and P1.1 should be set to “0” if no external pull-ups are used, or set to “1” if external pull-ups are used. 
It should be noted that when idle is terminated by a hardware reset, the device normally resumes program execution, from where it left off, up to two machine cycles before the internal reset algorithm takes control. On-chip hardware inhibits access to internal RAM in this event, but access to the port pins is not inhibited. To eliminate the possibility of an unexpected write to a port pin when Idle is terminated by reset, the instruction following the one that invokes Idle should not be one that writes to a port pin or to external memory.

 
 
 
Power-down Mode
 
 

In the power-down mode the oscillator is stopped, and the instruction that invokes power-down is the last instruction executed. The on-chip RAM and Special Function Registers retain their values until the power-down mode is terminated. The only exit from power-down is a hardware reset. Reset redefines the SFRs but does not change the on-chip RAM. The reset should not be activated before VCC is restored to its normal operating level and must be held active long enough to allow the oscillator to restart and stabilize. 
The P1.0 and P1.1 should be set to “0” if no external pull-ups are used, or set to “1” if external pull-ups are used.

 
 
 
Programming The Flash
 
 

The AT89C2051 is shipped with the 2K bytes of on-chip PEROM code memory array in the erased state (i.e., contents = FFH) and ready to be programmed. The code memory array is pro-grammed one byte at a time. Once the array is programmed, to re-program any non-blank byte, the entire memory array needs to be erased electrically.
 Internal Address Counter: The AT89C2051 contains an internal PEROM address counter which is always reset to 000H on the rising edge of RST and is advanced by applying a positive going pulse to pin XTAL1. 
Programming Algorithm: To program the AT89C2051, the following sequence is recommended.

 
 
 

 
 
 

 
 
 

 

 
 

 
 
 

 
 
 

 
 
 

 
 
 

 
 
 

 
 
 

 
 
 

 
 

Specifications
Description 8-bit MCU with 2K Bytes Flash
Pin/Package 20P/SOIC
Frequency MHz 24MHz
Int.Prog.Mem.(Flash) 2K FLASH
Int. SRAM(B) 128
重量 0.5g
Ordering Notes
一、商品資訊與規格說明

1. 商品顏色與圖片說明

  • 商品顏色可能因拍攝光線、攝影設備或使用者螢幕顯示設定不同而產生色差,請以實際出貨商品為準。
  • 商品情境圖僅供使用情境示意參考,實際出貨內容請以商品規格說明與內容物清單為準。
  • 本站商品圖片版權均屬本公司或合作供應商所有,其中大部分為實物拍攝,僅供產品展示與參考使用。未經本公司書面授權,任何單位或個人不得擅自下載、複製、轉載並用於任何商業用途,包括但不限於在其他網站、電商平台或廣告宣傳中使用。

2. 電子零組件規格說明

  • 電子零組件商品可能由多家供應商供貨,不同供應商之產品在尺寸、公差、外觀或標示上可能存在些微差異,惟不影響其基本功能。
  • 本網站所標示之尺寸、規格及相關技術資料僅供參考,實際內容仍以原廠最新公告及實際出貨商品為準。
  • 為避免規格差異造成損失,請勿於收到商品前即進行 PCB LAYOUT 設計、開模製作或大量生產。

3. 產品產地說明

  • 各品牌製造商之生產據點遍佈全球,即使為相同型號產品,不同批次之產地亦可能不同。

  • 本網站所標示之產地資訊為本公司首次進貨時之紀錄,後續實際出貨商品將依原廠供貨為準,恕不另行通知。

二、運費說明
  • 單筆訂單金額未滿新臺幣1200元,將加收運費新臺幣120元。

  • 選擇貨到付款者,除運費外,另依代收金額加收手續費。

  • 台灣離島地區將依實際配送情況及訂單內容酌收額外運費。

三、付款說明
  • 如採匯款方式付款,系統所配發之虛擬帳號具備單一性, 僅供該筆訂單進行匯款, 請勿將其用於其他交易。
四、商品使用與免責聲明
  1. 本平台所銷售之產品多屬「實驗、開發、維修或教育研究等專業用途」,僅供具備相關專業知識與技術能力之人士使用,並非一般消費者購買後即可直接操作之商品。

  2. 請於購買前詳閱產品規格書、技術文件與相關說明,確認符合實際應用需求後再行訂購。本公司恕不提供產品使用教學或技術指導服務。

  3. 因電子零件屬專業技術產品,如因選型錯誤、規格判斷不當、安裝或使用方式錯誤所導致之故障、損壞或任何直接、間接損失,本公司概不負責。

  4. 部分產品可能因原廠改版或批次差異,於外觀、標示或細部規格上略有不同,惟不影響產品基本功能。

  5. 本平台所提供之產品資訊如有更新不及或誤植情形,將以原廠正式資料為準。

  6. 如應用於醫療設備、航空航太、軍事用途或其他高風險安全相關系統,請務必自行向原廠確認產品適用性與安全規範,本公司不承擔相關應用責任。